2'' front led turn signal & running light with 1157 base + rear led brake light with 1156 base + bracket combo
- Stock: In Stock
- Model: 10261
- SKU: front-led-turn-signal-running-light-with-1157-base-rear-led-turn
Features:
Advanced Design: To increase lighting performance and lifespan, a built-in heat sink cooling base and a solid billet aluminum base are used. There is no additional wiring needed because the LED turn signals are constructed with 1157 Bullet Style Inserts. The turn signal can now be precisely centered thanks to the improved design.
Front turn signals and running lights: To light up the road, each light has 48 incredibly bright LEDs. There is a 21 LED halo ring on the front light. As the running light, the 6000K halo ring is a brilliant white color. The turn signal is produced by the 27 amber LEDs within. When the LED turn signal becomes inactive, the halo ring will turn off.
Brighter: Compared to other lights, LED turn signals with 48 ultra-bright LEDs are brighter, safer, and more resilient. It gives the road behind you a noticeable amount of lighting by forming a rear-facing LED cluster with stronger LEDs.
Plug and Play: Most Harley Davidson models are compatible with the 2" Harley LED Turn Signals. You save more time with plug and play designs. Take remove the dim bulb, unscrew the lens, and replace the lens with the new LED turn signal.
- 2 Pcs Front LED Turn Signal Lights with 1157 Dual Contact Base
- 2 Pcs Rear LED Brake Lights with 1156 Single Contact Base
- 4 Pcs Mounting Bracket
LED Turn Signal Light Running Light with White/Amber:
Turn Signal Light - Amber
The amber turn signal light is produced by the inner 27 LEDs.
The very visible Amber-Out-Amber-Out blinking can successfully draw the attention of oncoming cars and pedestrians.
Running Light - White Halo Ring
When the running light is turned on, the 21-LED outer halo ring is a brilliant white color.
Driving safety is ensured by the addition of a white halo ring to the LED headlight, which also improves running light visibility at night.
Plug N Play-1157 Dual Contact
- Tools are not needed. Installing takes only ten minutes.
- If the center taillight on your bike model is absent, then the 1157 dual contact bulb bases model is the best option.
LED Brake Light with Red:
Brake Light - Bright Red
- Each light illuminates the road behind you with 48 incredibly bright LEDs. It has the same features as the stock light, such as the running light, turn signal, and brake light.
- To keep drivers safe on the road, the brake light uses all 48 LEDs to flash a brilliant red light. They are very apparent and conspicuous.
Brighter LED
Plug N Play - 1156 Single Contact
- No equipment is needed. It takes only ten minutes to install. If the center taillight on your bike model is absent, then the best option is our 1156 single contact bulb bases model.
Note:
Some vehicles may have bulb-out or hyper-flashing of the turn signals; installing a load equalizer helps adjust the turn signal flash rate. If necessary, kindly verify and make your purchase here.JK373-SP
Fitment:
These turn signals fit various manufactures that use 2" turn signals with 1157 bases. They are for 2 inch dual contact bullet style turn signals. Installing load resistors can fix hyper flash that older machines may have experienced.
Note: International Harley Models: International Harley Models are not compatible with front turn signals. Before making a purchase, please check your original bulbs.
Harley Davidson models that the Road Equalizer fit are listed below.
Standard Road Equalizer Fitment:
- ‘96 - ‘10 Softails
- ‘97 - ‘11 Dynas
- ‘99 - ‘03 Sportsters
- ‘06 - ‘09 Street Glide
- ‘97 - ‘13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
- ‘97 - ‘09 Road Glide Models
- ‘10 - ‘13 Tri-Glide
Sportster Road Equalizer Fitment:
- 2004-2013 Sportster XL Models
Street Glide / Road Glide Road Equalizer Fitment:
- 2010-2013 Street Glide and Road Glide models