Description

Features:

• Advanced Design: The built-in heat sink cooling base and solid billet aluminum foundation design extend the life of the lighting and enhance its performance. No additional wiring is needed because the LED brake lights are designed with 1156 Bullet-style inserts. The turn signal can now be precisely centered thanks to the improved design.
• Brighter: Compared to other lights, LED turn signals with 48 ultra-bright LEDs are more optimistic, safer, and more resilient. With the help of a rear-facing LED cluster made of more robust LEDs, it brightens the road behind you so that other drivers will notice. Thanks to the heat-sink design, it may employ higher output LEDs for the brightest light possible.
• Plug N Play: Most Harley Davidson models are compatible with the 2" Harley Single Contact LED Turn Signals. Design that plugs and plays can save you extra time. Remove the dim bulb, unscrew the lens, and replace the lens with the new LED turn signal. It has the same ease as changing lightbulbs.

Red LED Brake Light:

Brake Light - Bright Red

- To light up the road behind you, each light uses 48 incredibly bright LEDs. It has the brake light in addition to all the features of the stock light.

- Using all 48 LEDs, the brake light flashes a brilliant red to keep drivers safe. They are very apparent and conspicuous.

Brighter LED

- Compared to other lights, LED brake lights with 48 ultra-bright LEDs are more durable, brighter, and safer.

- It utilizes more robust LEDs to create a rear-facing LED cluster, making the road behind you brighter for other drivers. It can employ higher output LEDs for the brightest light possible thanks to the heat-sink design. 

Plug N Play - 1156 Single Contact

- No tools are required. Only 10 minutes are required to install. 

- If the center taillight on your bike model is missing, then our 1156 single contact bulb bases model is the finest option.

Package included:

• 2* Rear brake lights with 1156 base and 2* mounting bracket

Note:

Bulb-out or hyper-flash of the brake lights may happen on some vehicles; the brake lights flash rate can be corrected by installing a Load Equalizer. If you need to, please confirm and purchase via here>>SP-JK373 

Fitment:

These brake lights fit other manufacturers that use 2" turn signals with 1156 bases. They are for 2-inch dual-contact bullet-style brake lights. Installing load resistors can fix the hyperflash that older machines may have experienced.

Note: International Harley Models: These models are incompatible with front brake lights. Before making a purchase, please check your original bulbs. 

Do I need a Load Equalizer?

The load equalizer eliminates hyper flash when installing LED brake lights on pre-2014 Harleys by slowing the turn signal flash rate to the average speed. A load equalizer is NOT needed on the following models:

• 2011 and Newer Softail Models
• 2012 and Newer Dyna Models
• 2014 and Newer Sportster Models
• 2014 and Newer Touring Models
• All of 2014 and newer Harley-Davidson Motorcycles

Harley Davidson models that the Road Equalizer fit are listed below.

Standard Road Equalizer Fitment:

• ‘96 - ‘10 Softails
• ‘97 - ‘11 Dynas
• ‘99 - ‘03 Sportsters
• ‘06 - ‘09 Street Glide
• '97 - '13 Touring Models (Electra Glide, Ultra Classic, Ultra Limited, Road King models)
• '97 - '09 Road Glide Models
• ‘10 - ‘13 Tri-Glide

Sportster Road Equalizer Fitment:

• 2004-2013 Sportster XL Models

Street Glide / Road Glide Road Equalizer Fitment:

• 2010-2013 Street Glide and Road Glide models

Note: Before placing an order, please verify that your bike has brake lights of type B (appropriate base).