BRAND-NEW Morimoto XB LED Taillights for the 2014-2021 Toyota Tundra
BRAND-NEW Morimoto XB LED Taillights for the 2014-2021 Toyota Tundra
The Toyota Tundra is a truck with a plethora of aftermarket choices that allow for infinite customization. Over the past few years, the aftermarket support has been absolutely wild. However, there hasn't been much demand for taillights on the 2014+ Toyota Tundra. With Morimoto's most recent XB LED taillights, such is no longer the case.
These are designed to look well on the back end of the third-generation Tundra and were inspired by the more recent OEM taillights from Toyota and Lexus. Like all of Morimoto's taillights, these have a number of features like sequential turn signals and a UV-coated body to withstand sun damage.
ABOUT
The 2014–2021 Toyota Tundra's XB LED taillight is another brilliant design from Morimoto. This truck has established itself in the history of automobiles and demonstrated its value on any terrain.
As is typical of Morimoto, these have contemporary styling that incorporates elements of pre-existing designs. This gives the light a modern yet futuristic look, guaranteeing that these will only age gracefully. The UV-polycarbonate lens will shield your taillights from the Sun's damaging rays while we're talking about aging.
TIR (Total Internal Reflector) optics built into the brake light, parking light, and turn signal illuminate the taillight's conspicuous light blades from the back. When you turn on your turn signal, the optics, which are made of red polycarbonate, actually light up amber.
Your truck's completely integrated LED reverse light turns on when you put it in reverse. The reverse light produced by the eight LEDs is brighter than most factory taillights because it shines light into the reflector-based optic.
TIR (Total Internal Reflector) optics built into the brake light, parking light, and turn signal illuminate the taillight's conspicuous light blades from the back. When you turn on your turn signal, the optics, which are made of red polycarbonate, actually light up amber.
Your truck's completely integrated LED reverse light turns on when you put it in reverse. The reverse light produced by the eight LEDs is brighter than most factory taillights because it shines light into the reflector-based optic.
HOW TO INSTALL
Tools Needed for the Job:
T30 Trox Bit Tool
Using a T30 screwdriver, open your bed door and take out the two screws at the top and bottom of your headlamp.
The OEM taillight can be pried off of the truck when those screws are removed. Unplug the factory connectors after that.
Insert your XB LED taillight into the three grey connectors that are visible.
On the back are three additional black plugs. This gives you the option to select between a conventional blinker and a sequential turn signal. Connect the red and blue wire plugs if you want the sequential turn signal. Plugging the yellow wire into the blue wire will result in a typical turn signal blinker.
Push your taillight back into place after the connections are set. After that, complete the installation by screwing in the bolts.
Make that the taillights are functioning correctly by going over each function.
CONCLUSION
In addition to the amazing XB LED taillights, we have made numerous other upgrades for your 14+ Toyota Tundra. We offer XB LED headlights, NSV lightbars, reverse lights for license plates, and more!