How To Install Jeep Wrangler Grille Inserts

Adding a grille insert to your car is a fun way to customize it and protect your engine. Installing a grille is surprisingly simple, something that many people are unaware of. Should you wish to purchase one for your Jeep Wrangler, follow these instructions to install Jeep Wrangler grille inserts.

1. Lift the Hood

Naturally, the first thing you should do is lift the car's bonnet and unhook the latches. The first step to getting to the grill will be this. Make sure you hold the hood up or prop it up for yourself just for safety.

2. Use a Flat-Head Screwdriver

Next, use a flat-head screwdriver to remove the six pop-clips that keep the grill in place. As soon as you open the hood, you will see these since they are located at the top of the grill. Although removing them is simple, take care not to scratch the Jeep's paint while doing so.

3. Gently Remove the Grill

The grille can be removed by gently tugging on it after the pop-clips have been removed because retainer clips hold it in place. The insert can then be installed by setting it on a table or other level surface. Remember to avoid scratching the paint when you put it on the table.

4. Snap In the Insert

The JK grille insert must then be positioned behind the grill. Remember that you will need to take out any existing inserts before putting the new one in. These grille inserts are not fastened to anything; instead, they are typically squeezed between the grill and the car.

5. Put the Grill Back

After inserting the grill, simply snap it back to the vehicle's retention clips, then replace all six pop-clips. You can also manually replace the pop-clips. After closing the hood, you're done.

You now understand the three stages involved in installing grille inserts for a Jeep Wrangler. We at Ledlightjeep are happy to provide a large selection of grille inserts, so be sure to check out our online store right now.